Serving Nashville and Middle TennesseeFree Estimate
Veneer and Stone Repair in Nashville and Middle Tennessee
Masonry, Walls and Structural Support

Veneer and Stone Repair

Repairing loose, cracked or fallen brick veneer, stone veneer and decorative stonework on homes and walls.

Brick and stone veneer give a home its look, and they hang on the wall with ties rather than carrying the house. When ties rust, flashing fails or the foundation moves, veneer can bulge, crack or fall. Nashville homes with stone fronts and brick walls sometimes show this, and the wall needs more than a patch to be safe.

Your specialist inspects the veneer for bulges, gaps, cracks and loose pieces, checks the ties and flashing behind it and looks at the foundation for movement. Loose veneer is taken down, ties and flashing are repaired or replaced and masonry is rebuilt with matching brick or stone. Mortar is matched for color and strength, and the wall is cleaned and sealed where appropriate. Loose veneer is a safety issue as well as a cosmetic one, so keep people and pets away from bulges and gaps until repairs are made. Photograph the wall from a few angles and note any stains, rust marks or water spots nearby. Those clues help your specialist find failed flashing or ties, and they help match the repair to the real cause, not just the visible damage.

Ties hold it on

Metal ties connect veneer to the wall, and when they rust, the veneer can pull away.

Flashing keeps it dry

Flashing sends water out of the wall, and failed flashing leads to rot, rust and loose veneer.

Foundation movement

Cracks and gaps in veneer often track movement in the foundation, so that is checked and handled.

Match the look

Brick, stone and mortar are matched so repairs blend with the existing wall.

What is included

  • Veneer inspection
  • Tie and flashing check
  • Foundation review
  • Veneer removal and rebuild
  • Matched masonry
  • Cleaning
Before and after

See the transformation.

Drag the handle to compare.

After: a basement wall with the same wall repaired with neat sealed joints, a clean uniform surface and a dry baseBefore: a basement wall with a gray concrete block basement wall with a long stair-step crack, white mineral stains and a damp patch at its baseBeforeAfter
A cracked, leaking basement wall repaired, sealed and finished. From a gray concrete block basement wall with a long stair-step crack, white mineral stains and a damp patch at its base to the same wall repaired with neat sealed joints, a clean uniform surface and a dry base.
Why it works

What you get with Veneer and Stone Repair

Inspect the veneer

Bulges and cracks noted.

Check ties and flashing

Rust and gaps found.

Check the foundation

Movement considered.

Take down loose veneer

Carefully removed.

Repair and rebuild

Ties, flashing and masonry.

Match and finish

Mortar, color and cleaning.

Try it now

Foundation Problem Checker: What Is Wrong?

Pick what you see in your walls, floors, basement, crawl space or concrete to get likely causes, what to try first and the service page that fits.

How it works

Our process, start to finish.

  1. 01

    Call and describe it

    You tell us what you see and where the property is. One call sets up a visit that fits your day.

  2. 02

    Inspect and measure

    A specialist walks the inside and outside, checks cracks, floors, moisture and drainage and takes measurements and photos.

  3. 03

    Plan and approve

    You receive a plain written scope with the cause, the method, the location of each repair and the schedule before anything begins.

  4. 04

    Mark utilities and prepare

    Utility marking is requested where digging is needed, access is protected and materials and any engineering are lined up.

  5. 05

    Repair and protect

    Supports, drains, sealing or lifting are completed in a clear order, with photos and checks along the way.

  6. 06

    Walk through and review

    The site is cleaned up, the work is explained on a walk-through and care and monitoring tips are shared.

Questions

Veneer and Stone Repair FAQ

Can loose veneer be saved?

Sometimes it can be re-secured, and sometimes it is taken down and rebuilt.

Why is my veneer bulging?

Rusted ties, trapped water or foundation movement can push veneer outward.

Is a fallen veneer dangerous?

It can be, so keep people away from loose or bulging areas until it is repaired.

Can stone be matched?

Often yes, and samples and salvage stone can help.

Does veneer repair need a permit?

Rules vary, and your specialist explains what is common.

Next step

Get your Free Estimate for Veneer and Stone Repair.

Tell us about your property and one specialist will call you back to set up a visit.

Or call (615) 431-3789 to talk now.

Tell us about your property

One specialist will call you back to talk it through and set up a visit.

Prefer to talk? Call (615) 431-3789. We never sell your information.

CallFree Estimate