Serving Nashville and Middle TennesseeFree Estimate
Permit and Code Guidance in Nashville and Middle Tennessee
Estimates, Plans and Support

Permit and Code Guidance

Plain help understanding when a permit, an engineer or an inspection is common for foundation work, and how to prepare.

Permit rules for foundation repair, waterproofing and new foundations vary by city and county, and the question comes up on almost every larger project. A little guidance goes a long way. Owners in Nashville and neighboring counties use it to know what to expect, what to ask the local office and what documents to prepare.

Your specialist explains which kinds of work commonly need permits, engineering or inspections, helps you gather drawings, photos, measurements and scopes and points you to the right local office. Where an engineer or a permit applies, the scope and schedule reflect it. You confirm requirements with your local codes office, and your specialist helps keep the project moving. The local office is the final word on permits, so a short call can save weeks. Ask what documents they need, how long reviews take, which inspections apply and whether an engineer's stamp is required for your project. Your specialist can help you gather the answers and fold them into the schedule, so your project keeps moving and nothing needs to be redone.

Know what is common

Structural repairs, new foundations, additions and retaining walls often involve permits, while minor repairs may not.

Prepare the paperwork

Clear scopes, drawings and photos make the process smoother for you and for the reviewer.

Engineers when needed

Some work calls for an engineer's drawing or letter, and your specialist helps arrange it.

Inspections on schedule

Inspection stages are built into the schedule so nothing is covered before it is checked.

What is included

  • Common rules overview
  • Document preparation
  • Engineer coordination
  • Local office questions
  • Inspection scheduling
  • Record keeping
Before and after

See the transformation.

Drag the handle to compare.

After: a basement wall with the same wall repaired with neat sealed joints, a clean uniform surface and a dry baseBefore: a basement wall with a gray concrete block basement wall with a long stair-step crack, white mineral stains and a damp patch at its baseBeforeAfter
A cracked, leaking basement wall repaired, sealed and finished. From a gray concrete block basement wall with a long stair-step crack, white mineral stains and a damp patch at its base to the same wall repaired with neat sealed joints, a clean uniform surface and a dry base.
Why it works

What you get with Permit and Code Guidance

Describe the project

Work and location.

Review common rules

Permits and inspections.

Gather documents

Drawings and photos.

Contact the local office

Questions confirmed.

Schedule inspections

Built into the plan.

Keep records

For your files and sale.

Try it now

Foundation Repair Budget Planner

Pick a foundation, waterproofing, drainage or concrete job, set the quantity and add extras to see a ballpark planning range. Placeholder values only.

How it works

Our process, start to finish.

  1. 01

    Call and describe it

    You tell us what you see and where the property is. One call sets up a visit that fits your day.

  2. 02

    Inspect and measure

    A specialist walks the inside and outside, checks cracks, floors, moisture and drainage and takes measurements and photos.

  3. 03

    Plan and approve

    You receive a plain written scope with the cause, the method, the location of each repair and the schedule before anything begins.

  4. 04

    Mark utilities and prepare

    Utility marking is requested where digging is needed, access is protected and materials and any engineering are lined up.

  5. 05

    Repair and protect

    Supports, drains, sealing or lifting are completed in a clear order, with photos and checks along the way.

  6. 06

    Walk through and review

    The site is cleaned up, the work is explained on a walk-through and care and monitoring tips are shared.

Questions

Permit and Code Guidance FAQ

Do I need a permit for foundation repair?

It depends on the work and the location. Structural work often does, and your local codes office makes the call.

Who pulls the permit?

It varies. Your specialist explains who usually handles it and helps either way.

What is an inspection for?

An inspector verifies that work meets the code at key stages, such as before concrete is poured or covered.

Will a permit slow the job down?

It can add time, which is why it is built into the schedule from the start.

What happens if work is done without a permit?

It can cause problems when you sell or refinance, so it is best to ask first.

Next step

Get your Free Estimate for Permit and Code Guidance.

Tell us about your property and one specialist will call you back to set up a visit.

Or call (615) 431-3789 to talk now.

Tell us about your property

One specialist will call you back to talk it through and set up a visit.

Prefer to talk? Call (615) 431-3789. We never sell your information.

CallFree Estimate