Serving Nashville and Middle TennesseeFree Estimate
Concrete Resurfacing and Spalling Repair in Nashville and Middle Tennessee
Concrete Lifting and Repair

Concrete Resurfacing and Spalling Repair

Restoring worn, flaking or pitted concrete surfaces with repair mixes, overlays and coatings that look fresh and last.

Concrete can look tired long before it fails. Surface flaking, pits and exposed stone, called spalling, come from freeze and thaw, salts, poor finishing and years of wear. If the slab underneath is sound, resurfacing can renew it. Nashville driveways, patios and garage floors with worn tops often make good candidates.

Your specialist inspects the surface, tests for soundness and chooses a resurfacing system. Loose material is removed, spalled areas are patched with repair mixes, and the surface is cleaned and primed. A thin cementitious overlay or a coating is applied, with texture or color if desired. Control joints are honored, and cracks are repaired first so they do not telegraph through the new surface. Surface repairs last longest on a clean, dry slab, so timing matters. Spring and fall often bring the right mix of temperature and humidity, and your specialist may suggest a dry window in the forecast. Ask about sealing afterward, because a good sealer protects the new surface from water, de-icing salts and stains, which is the main reason that spalling starts in the first place.

Is the base sound?

Resurfacing works on a solid slab. If the concrete is crumbling or moving, other repair comes first.

Patch, prime and cover

Damaged areas are repaired, the surface is prepared and an overlay or coating bonds to it.

Texture and color

Finishes can add grip and style, from a simple broom texture to colored coatings.

Honor the joints

Existing control joints are carried through the new surface so cracks do not appear in random places.

What is included

  • Surface testing
  • Spall removal
  • Patching and crack repair
  • Priming
  • Overlay or coating
  • Finish and cure
Before and after

See the transformation.

Drag the handle to compare.

After: a driveway with the same driveway lifted level with sealed joints, small neat patched holes and no standing waterBefore: a driveway with a concrete driveway slab sunken and tilted toward a garage with a gap at the joint, a wide crack and a puddle of waterBeforeAfter
A sunken driveway slab lifted level and sealed. From a concrete driveway slab sunken and tilted toward a garage with a gap at the joint, a wide crack and a puddle of water to the same driveway lifted level with sealed joints, small neat patched holes and no standing water.
Why it works

What you get with Concrete Resurfacing and Spalling Repair

Test the slab

Soundness checked.

Remove loose material

Spalled areas cleaned out.

Patch and repair

Pits and cracks filled.

Prepare and prime

Surface made ready.

Apply the overlay

Resurfacer or coating placed.

Finish and cure

Texture and care.

Try it now

Which Foundation Service Do I Need? Quiz

Answer five questions about your property, what you see and your timing to see which foundation services to start with.

How it works

Our process, start to finish.

  1. 01

    Call and describe it

    You tell us what you see and where the property is. One call sets up a visit that fits your day.

  2. 02

    Inspect and measure

    A specialist walks the inside and outside, checks cracks, floors, moisture and drainage and takes measurements and photos.

  3. 03

    Plan and approve

    You receive a plain written scope with the cause, the method, the location of each repair and the schedule before anything begins.

  4. 04

    Mark utilities and prepare

    Utility marking is requested where digging is needed, access is protected and materials and any engineering are lined up.

  5. 05

    Repair and protect

    Supports, drains, sealing or lifting are completed in a clear order, with photos and checks along the way.

  6. 06

    Walk through and review

    The site is cleaned up, the work is explained on a walk-through and care and monitoring tips are shared.

Questions

Concrete Resurfacing and Spalling Repair FAQ

Is resurfacing as good as replacement?

For a sound slab with a worn top, resurfacing can renew the look and protect the surface at far less disruption than replacing.

What causes spalling?

Freeze and thaw, deicing salts, poor finishing and moisture can all cause the surface to flake.

How long does a resurfaced slab last?

Results depend on the slab, the product and the use. Your specialist explains what to expect.

Can I change the color?

Many coatings and overlays are available in colors, and samples help you choose.

Will cracks show through?

Cracks should be repaired first, and joints preserved. Some movement cracks may still reappear.

Next step

Get your Free Estimate for Concrete Resurfacing and Spalling Repair.

Tell us about your property and one specialist will call you back to set up a visit.

Or call (615) 431-3789 to talk now.

Tell us about your property

One specialist will call you back to talk it through and set up a visit.

Prefer to talk? Call (615) 431-3789. We never sell your information.

CallFree Estimate