Serving Nashville and Middle TennesseeFree Estimate
Footings and Stem Walls in Nashville and Middle Tennessee
New Foundations, Additions and Specialty Work

Footings and Stem Walls

The hidden base of a building: continuous footings and stem walls sized for loads, frost and soil.

Footings are the wide, buried base of a foundation, and stem walls rise from them to hold the floor and walls. They spread the weight of a house across soil that can carry it. Nashville soils vary from soft clay to hard rock, so footings are sized and set to match. Nothing else on a project matters if this part is wrong.

Your specialist lays out footing trenches, checks depth and bearing, sets forms and reinforcement and pours concrete. Stem walls of block or poured concrete are built on top, with anchor bolts and sill details planned for the framing. Drainage and waterproofing are added as the project calls for, and inspections are scheduled at the required stages so the base is verified before it is covered. Footings are hidden, so ask to see photos at each stage. A good record shows the trench, the soil at the bottom, the steel and the pour, and it is useful years later if you add on or sell. Your specialist can coordinate the inspections that your location requires and share the records with you, so you have a complete picture of the base of your building.

Spread the load

Wide footings reduce the pressure on the soil, so the building stays level instead of sinking.

Depth matters

Footings are set below frost depth and on firm, undisturbed soil, which protects against heave and settlement.

Reinforcement

Steel in footings and walls resists cracking and carries loads across weak spots.

Inspect before covering

Footings are inspected before they are buried, so the base is checked while it can be seen.

What is included

  • Trench layout
  • Bearing check
  • Forms and rebar
  • Concrete footing
  • Stem wall
  • Pre-cover inspection
Before and after

See the transformation.

Drag the handle to compare.

After: a driveway with the same driveway lifted level with sealed joints, small neat patched holes and no standing waterBefore: a driveway with a concrete driveway slab sunken and tilted toward a garage with a gap at the joint, a wide crack and a puddle of waterBeforeAfter
A sunken driveway slab lifted level and sealed. From a concrete driveway slab sunken and tilted toward a garage with a gap at the joint, a wide crack and a puddle of water to the same driveway lifted level with sealed joints, small neat patched holes and no standing water.
Why it works

What you get with Footings and Stem Walls

Stake and dig

Trenches laid out.

Check the bearing

Soil confirmed.

Set forms and rebar

Reinforcement placed.

Pour the footing

Concrete placed.

Build the stem wall

Block or poured.

Inspect and protect

Checked before backfill.

Try it now

Foundation Project Timeline Planner

Pick the project and options to see a typical sequence from estimate and engineering to utility marking, repair and cleanup.

How it works

Our process, start to finish.

  1. 01

    Call and describe it

    You tell us what you see and where the property is. One call sets up a visit that fits your day.

  2. 02

    Inspect and measure

    A specialist walks the inside and outside, checks cracks, floors, moisture and drainage and takes measurements and photos.

  3. 03

    Plan and approve

    You receive a plain written scope with the cause, the method, the location of each repair and the schedule before anything begins.

  4. 04

    Mark utilities and prepare

    Utility marking is requested where digging is needed, access is protected and materials and any engineering are lined up.

  5. 05

    Repair and protect

    Supports, drains, sealing or lifting are completed in a clear order, with photos and checks along the way.

  6. 06

    Walk through and review

    The site is cleaned up, the work is explained on a walk-through and care and monitoring tips are shared.

Questions

Footings and Stem Walls FAQ

How deep should footings be?

Depth depends on local frost depth, soil and the design. Your plan and local code set the minimum.

Do footings need rebar?

Many do, and the design specifies where steel goes.

What is a stem wall?

The short wall that rises from a footing to support the floor and walls above.

Can footings be added to an old house?

Yes, through underpinning or new footings for additions. Your specialist explains the options.

Why are footings inspected?

Because they cannot be seen once buried, inspections verify depth, size and steel before they are covered.

Next step

Get your Free Estimate for Footings and Stem Walls.

Tell us about your property and one specialist will call you back to set up a visit.

Or call (615) 431-3789 to talk now.

Tell us about your property

One specialist will call you back to talk it through and set up a visit.

Prefer to talk? Call (615) 431-3789. We never sell your information.

CallFree Estimate